BlastPED III Operator Manual
20
At the Security Request prompt, connect or insert
the Security Media to one of the configured
locations as requested.
The Security Media must be present in exactly one
of the configured locations. If a duplicate is found, it
will be rejected.
Upon successful verification of the Security Media,
the message “Media verified” will be displayed and
Ready button will become enabled.
Press
Ready
to create an ARM message and add it to the PED Message Queue. It will be
sent at the earliest opportunity.
To progress, if the Blasting Message Panel
is not open, click again on the “BlastPED” toolbar
icon to open it.
Click on the BLAST button appropriate to the units being blasted.
Insert the security media in one of the configured locations and click Ready to proceed when
Media is verified.
A BLAST message is created on the PED Message Queue and will be sent at the earliest
opportunity.
