USER MANUAL V2.0| Updated 01-Aug-2017
13
GETTING STARTED
Install the machine on your conveyor according to the installation instructions. See the Quick Start
Guide for more information.
•
Set print direction and appropriate throw distance to obtain best print quality (1-3 mm).
•
Insert ink cartridge.
•
Plug the power cord into an appropriate power source to start up the machine.
•
The printer need PE (Protective earthing conductor) connection before use.
EXTERNAL DEVICES CONNECTIONS
NOTES:
•
Machine is able to operate with External Sensor, Encoder, Alarm at a time. Consult your supplier
for further supports on the settings and connections.
•
To connect machine with External Sensor, Encoder, Alarm, etc…, additional connector DB15
(male) will be required.
EXTERNAL SENSOR
Machine supports NPN, PNP and Push-pull sensor types.
•
Connect sensor using power supply on machine
24VDC
.
•
Connect sensor to machine using external power supply. Below demonstration is for external
power supply of
5VDC
.
