MSI Z75A-GD55 series User Manual Download Page 88

Page: 88 / 90

B-14

Intel RAID

System Acceleraton (optonal)

Intel

Rapd Storage Technology use a SSD as a cache. Whch can store frequently

used data wthout havng to use a slow vrtual dsk or depend on RAM. The SSD cache

wth the advantages of hgh-speed read/wrte and non-volatle memory to accelerate the

system performance.

Important

Check your SSD manufacturer's webste, upgrade firmware n order to support

Intel

Rapd Storage Technology

Intel

Rapd Storage Technology can only work wth RAID mode. Even though there s

only one hard drve, you must set the SATA Mode to RAID n BIOS. The OS must be

nstalled n the RAID ready dsk n order to use the SSD cachng.

Follow these steps to enable system acceleraton. If Wndows has been nstalled n

RAID mode, skp to the step 5.

Reboot and enter the BIOS steup.
Set the SATA Mode to RAID n BIOS.
Install Intel

RAID controller drver. Please refer to the secton "Installng Drver".

Install Wndows operatng system.
Powered off.
Connect the SSD.
Reboot the system to Wndows.
Insert the MSI DVD nto the DVD-ROM drve.

1.
2.
3.
4.
5.
6.
7.
8.

Clck here

Clck the “STORAGE” on the Setup screen.

Clck the "Intel RAID Drver" to nstall Intel

Rapd Storage Technology applcaton.

10.

Summary of Contents for Z75A-GD55 series



























































































Search results

Summary of Contents for Z75A-GD55 series

Reviews:

Related manuals for Z75A-GD55 series

Brands by name

Popular brands

MSI Z75A-GD55 series, User Manual

Search results

Summary of Contents for Z75A-GD55 series

Reviews:

Related manuals for Z75A-GD55 series

Brands by name

Popular brands