MSI Z75A-GD55 series User Manual Download Page 34

Page: 34 / 90

1-24

Gettng Started

Internal Connectors

SATA1~6: SATA Connector

Ths connector s a hgh-speed SATA nterface port. Each connector can connect to one

SATA devce. SATA devces nclude dsk drves (HDD), sold state drves (SSD), and

optcal drves (CD/ DVD/ Blu-Ray).

* The MB layout n ths figure s for reference only.

SATA1~2 (6Gb/s, by Intel

Z77/ Z75)

SATA3~6 (3Gb/s, by Intel

Z77/ Z75)

SATA2

SATA1

SATA4

SATA3

SATA6

SATA5

Important

Many SATA devces also need a power cable from the power supply. Such devces

nclude dsk drves (HDD), sold state drves (SSD), and optcal drves (CD / DVD /

Blu-Ray). Please refer to the devce’s manual for further nformaton.
Many computer cases also requre that large SATA devces, such as HDDs, SSDs,

and optcal drves, be screwed down nto the case. Refer to the manual that came

wth your computer case or your SATA devce for further nstallaton nstructons.
Please do not fold the SATA cable at a 90-degree angle. Data loss may result durng

transmsson otherwse.
SATA cables have dentcal plugs on ether sdes of the cable. However, t s rec-

ommended that the flat connector be connected to the manboard for space savng

purposes.

•

Summary of Contents for Z75A-GD55 series



























































































Search results

Summary of Contents for Z75A-GD55 series

Reviews:

Related manuals for Z75A-GD55 series

Brands by name

Popular brands

MSI Z75A-GD55 series, User Manual

Search results

Summary of Contents for Z75A-GD55 series

Reviews:

Related manuals for Z75A-GD55 series

Brands by name

Popular brands