MSI Whitebook MS-1013, Installation Manual

Page: 18 / 30

Step 4: Installing Mini PCI WLAN Card
4-1 Remove the older module (if replacing) by pulling tabs of the socket outward using your thumbs.
4-2 a.b.c The module should pop up into a 45 degree angle. Remove the module by pulling it gently
backward. Use side-to-side motion, if necessary, to remove. Unplug the antennas. Mini PCI module
should be inserted firmly at a 45 degree angle and pushed down until module snaps into place. After the
module
snaps into place, connect antennas on the Mini PCI card.
Hint: (Black Wire connects to Main; Gray wire connect to Bluetooth and Aux)
!!! The location of the notch along the gold edge of the Mini PCI module needs to be lined up with
keyed notch in the socket. Mini PCI module can only fit in one direction due to the keyed notch.
Wrong orientation will cause improper installation and may damage the Mini PCI module or Mini
PCI socket!!!