15
Overview of Components
Overview of Components
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Keep Data
(default)
Clear CMOS/ Reset
BIOS
Resetting BIOS to default values
1.
Power off the computer and unplug the power cord
2.
Use a jumper cap to short JBAT1 for about 5-10 seconds.
3.
Remove the jumper cap from JBAT1.
4.
Plug the power cord and power on the computer.
EZ Debug LED
These LEDs indicate the status of the motherboard.
CPU
- indicates CPU is not detected or fail.
DRAM
- indicates DRAM is not detected or fail.
VGA
- indicates GPU is not detected or fail.
BOOT
- indicates booting device is not detected or fail.
Summary of Contents for PRO-L J3355TI
Page 20: ...2 목차 소프트웨어 설명 18 Windows 10 운영 체제 설치하기 18 드라이버 설치하기 18 유틸리티 설치하기 18 ...
Page 92: ...2 目录 软件描述 18 安装 Windows 10 18 安装驱动 18 安装工具 18 ...
Page 110: ...2 目錄 軟體說明 18 安裝 Windows 10 18 安裝驅動程式 18 安裝公用程式 18 ...
Page 128: ...2 目次 ソフトウェアの解 18 Windows 10のインス トール 18 ドライバーのインス トール 18 ユーティ リティのインス トール 18 ...
