60
PC2PC Bluetooth
* Network Access
The Bluetooth Network Access service makes it possible for
a remote Bluetooth device to use the Local Area Network
connection that is physically attached to this computer.
After this computer has been configured to provide the Net-
work Access service to other Bluetooth devices, it will not be
able to use the Bluetooth Network Access service provided
by another Bluetooth device without being re-configured.
Put another way, this computer cannot be both a Bluetooth
Network Access server and a Bluetooth Network Access cli-
ent at the same time.
Setup for Windows 98SE & Windows Me
MSI Reminds You...
Internet Protocol routing software is required on Win-
dows 98SE and Windows Me servers.
Install and configure the routing software as instructed
by the software’s manufacturer.
* Configure the server:
1. From the Windows Control Panel, double-click the
Network icon.
2. On the Configuration tab, select TCP/IP-> Bluetooth
LAN Access Server Driver (scroll down if necessary).
3. Click Properties and select the IP Address tab.
4. Select Specify an IP address
5. Enter an IP Address (suggested value—192.168.1.1)
6. Enter a Subnet Mask (suggested value—255.255.255.
0 )
7. Click OK twice to close the dialog boxes and then click