background image

MusicOne 24  User Guide 

Page | 5                                                                                                                     © Cambron Software 2015 

 

Assembling the Solid Base Stand (Optional if supplied with Tripod Stand) 

Attach the “top hat” to the semi-circular base using the 2 coach bolts, washers and wing nuts.  The 
wing nuts and washers fit into the recesses in the bottom of the base. Slide the top hat into a central 
position on the bolts and tighten them. Tighten down the bolts so that the square “shoulder” of the 
bolt is seated into the hole on the base.  The wing nuts can be tightened using a pair of piers, if 
necessary, for a permanent installation, use the 2 hex nuts that are supplied.  Insert the pole and 
tighten the Tommy bolt. DO NOT over-tighten the Tommy bolt.

 

Assembling the MusicOne 24 

 

Step 1 

Remove the fold-out stand on the rear of the PC. 

 

Step 2 

Separate the two parts of the Quick Release mount and attach 
the part with the large round metal boss to the 4 VESA screw 
holes (used to attach the fold-out stand). 

Use the countersunk 

Allen screws supplied.

 Make sure the small round boss on the 

plate is towards the bottom of the PC. Line up the holes 
carefully. Don’t fully tighten the bolts until you have each bolt 
in place. 

 

STEP 3 

Fix the other half of the Quick Release mount to the VESA Pole 
mount. Using 4 x 10mm bolts supplied with the VESA pole mount. 

It is very important you use the correct screws in each 
position. Tighten the screws firmly but do not over-tighten 
them. 

 
Do not to use longer screws to attach the Plate to the 
monitor.  They may damage the circuit board in monitor

 

 

 

 

Summary of Contents for MUSICONE 24













Reviews: