Hardware Setup
▍
MS-S0361
2-11
Hardware Setup
▍
MS-S0361
Connector
Serial ATA Connector: SATA0, SATA1
Ths connector s a hgh-speed Seral ATA nterface port. Each connector can con-
nect to one Seral ATA devce.
Important
Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss may
occur during transmission.
Fan Power Connector: CPU_F1, SYSFAN1
The fan power connectors support system coolng fan wth +12V. When connectng
the wre to the connectors, always note that the red wre s the postve and should be
connected to the +12V; the black wre s Ground and should be connected to GND.
If the manboard has a System Hardware Montor chpset onboard, you must use a
specally desgned fan wth speed sensor to take advantage of the CPU fan control.
PIN
SIGNAL
1
2
3
4
GND
+12V
Sensor
Control
PIN
SIGNAL
1
2
3
GND
+12V
Sensor
1
3
CPU_F1
4
1
SYSFAN1
Important
Please refer to the recommended CPU fans at processor’s official website or consult
the vendors for proper CPU cooling fan.
Summary of Contents for MS-S0361
