3-18
BIOS Setup
MS-S0131
BIOS Setup
MS-S0131
Boot
Bootup NumLock State
Ths settng s to set the Num Lock status when the system s powered on. Settng
to [On] will turn on the Num Lock key when the system is powered on. Setting to
[Off] will allow users to use the arrow keys on the numeric keypad.
Quiet Boot
Ths BIOS feature determnes f the BIOS should hde the normal POST mes-
sages wth the motherboard or system manufacturer’s full-screen logo.
When t s enabled, the BIOS wll dsplay the full-screen logo durng the boot-up
sequence, hdng normal POST messages.
When t s dsabled, the BIOS wll dsplay the normal POST messages, nstead
of the full-screen logo.
Please note that enablng ths BIOS feature often adds 2-3 seconds of delay to
the bootng sequence. Ths delay ensures that the logo s dsplayed for a suf-
ficient amount of time. Therefore, it is recommended that you disable this BIOS
feature for a faster boot-up tme.
CSM Support
Ths settng enables/dsables the support for Compatblty Support Module, a
part of the Intel Platform Innovaton Framework for EFI provdng the capablty to
support legacy BIOS nterfaces.
Boot Option Priorities
The tems allow you to set the sequence of boot devces where BIOS attempts to
load the dsk operatng system. Frst press <Enter> to enter the sub-menu. Then
you may use the arrow keys ( ↑↓ ) to select the desired device, then press <+>,
<-> or <PageUp>, <PageDown> key to move t up/down n the prorty lst.
▶
▶
▶
▶
