MSI MS-B062, User Manual

Page: 16 / 76

Overview
1-4
Rear View
11
3
4
5
7
8
6
9
10
2
1
3
3
1
Card Reader Drive
The built-in card reader may support various types of memory cards.
2
Power Button/ LED
Press the power button to turn the system on and off. The power LED glows
when the system is turned on and goes off when the system is shut down.
In terms of power saving, the LED blinks in S3 (Suspend to RAM) mode and
goes off in S4 (Suspend to Disk) mode. Pressing the system power button
will wake the system up from power saving mode.
3
Ventilator
The ventilator on the enclosure is used for air convection and to prevent the
equipment from overheating. Do not cover the ventilator.
4
VGA-Out Port
The DB15-pin female connector is provided for monitor.

4
USB 2.0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices. It supports up to
480Mbit/s (Hi-Speed) data transfer rate.
5
Headphone Jack
This is a connector for headphones.
6
Microphone Jack
This is a connector for microphones.
7
WLAN LED
This indicator glows green when WLAN function is enabled and glows blue
when WiMax function is enabled. The indicator goes out when this function
is disabled.
8
HDD LED
This indicator shows the activity status of the HDD. It flashes when the
system is accessing data on the HDD and remains off when no disk activity
is detected.
9
Stand
Use this stand to position your system on a flat and stable surface. Another
way to position your system without stand is to lay your system horizontally
on the surface with the Power Button faces up to the top.