MSI MS-9252, User Manual, Page: 31 / 113

2-11
System Hardware
1. To release the hot-swapping HDD tray, flip open the tray lever and pull the tray out
of the bay.
Hard Disk Drive
2. At the rear of the HDD are four screw holes, two on the right and two on the left
side. At the back of the HDD rack are four identical screw holes as on the HDD.
Place the HDD into the rack and align the screw holes on the HDD with the ones on
the rack. Secure the HDD with four screws supplied by the HDD vendor.