3-14
BIOS Setup
▍
MS-91F7
BIOS Setup
▍
MS-91F7
Display Full Screen Logo
Ths BIOS feature determnes f the BIOS should hde the normal POST mes-
sages wth the motherboard or system manufacturer’s full-screen logo.
When t s enabled, the BIOS wll dsplay the full-screen logo durng the boot-
up sequence, hdng normal POST messages.
When t s dsabled, the BIOS wll dsplay the normal POST messages, nstead
of the full-screen logo.
Please note that enablng ths BIOS feature often adds 2-3 seconds of delay
to the bootng sequence. Ths delay ensures that the logo s dsplayed for a
sufficient amount of time. Therefore, it is recommended that you disable this
BIOS feature for a faster boot-up tme.
Boot Device Priority
The tems allow you to set the sequence of boot devces where BIOS attempts to
load the dsk operatng system. Frst press <Enter> to enter the sub-menu. Then
you may use the arrow keys ( ↑↓ ) to select the desired device, then press <+>,
<-> or <PageUp>, <PageDown> key to move t up/down n the prorty lst.
USB Drives
Ths settng allows users to set the prorty of the USB devces. Frst press <En-
ter> to enter the sub-menu. Then you may use the arrow keys ( ↑↓ ) to select the
desred devce, then press <+>, <-> or <PageUp>, <PageDown> key to move t
up/down n the prorty lst.
▶
▶
▶
