MSI MS-7204 Page 3 Instruction Manual Download

Page: 3 / 36

iii

Copyright Notice

The material in this document is the intellectual property of

MICRO-STAR

INTERNATIONAL

. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

AMD, Athlon

™

, Athlon

™

XP, Thoroughbred

™

, and Duron

™

are registered trade-

marks of AMD Corporation.

Intel

and Pentium

are registered trademarks of Intel Corporation.

PS/2 and OS

/2 are registered trademarks of International Business Machines

Corporation.

Microsoft is a registered trademark of Microsoft Corporation. Windows

98/2000/NT/

XP are registered trademarks of Microsoft Corporation.

NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-

marks of NVIDIA Corporation in the United States and/or other countries.

Netware

is a registered trademark of Novell, Inc.

Award

is a registered trademark of Phoenix Technologies Ltd.

AMI

is a registered trademark of American Megatrends Inc.

Kensington and MicroSaver are registered trademarks of the Kensington Technology

Group.

PCMCIA and CardBus are registered trademarks of the Personal Computer Memory

Card International Association.

Technical Support

If a problem arises with your system and no solution can be obtained from the user

’

manual, please contact your place of purchase or local distributor. Alternatively,

please try the following help resources for further guidance.

†

Visit the MSI homepage & FAQ site for technical guide, BIOS updates, driver

updates, and other information:

http://www.msi.com.tw

http://www.msi.

com.tw/program/service/faq/faq/esc_faq_list.php

†

Contact our technical staff at:

[email protected]

Revision History

Revision

Revision History

Date

V1.0

First release for PCB 1.X

October 2005

with Intel 945P & ICH7/ICH7R

Summary of Contents for MS-7204





































Search results

Summary of Contents for MS-7204

Reviews:

Related manuals for MS-7204

Brands by name

Popular brands

MSI MS-7204, Instruction Manual

Search results

Summary of Contents for MS-7204

Reviews:

Related manuals for MS-7204

Brands by name

Popular brands