MSI MS-7145, Manual

Page: 57 / 106

3-15
BIOS Setup
Suspend Time Out (M inute)
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Setting options: [Disabled], [1], [2], [3], [4], [5],
[10], [15], [32], [64].
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power Off] The power button functions as a normal power-on/-off button.
[Suspend] W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.
Restor e on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Setting options:
[Off] Leaves the computer in the power off state.
[On] Leaves the computer in the power on state.
[Last State]
Wakeup Event Setup
Press <Enter> and the following sub-menu appears.
Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state. Setting options: [Disabled], [Enabled].
Resume by PS/2 Keyboard
This setting specifies how the system will be awakened from power saving
mode when input signal of the keyboard is detected. Setting options: [Any Key],
[Specific Key], [Disabled].
Key board Password
If Resume by PS/2 Keyboard is set to Specific Key , then you can set a
password in the field for the PS/2 keyboard to power on the system.
Resume by PS/2 M ouse
The setting determines whether the system will be awakened from what power
saving modes when input signal of the PS/2 mouse is detected. Setting options:
[Disabled], [Enabled].