3-18
MS-6764 ATX Mainboard
to restore the system when a “wake up” event occurs.
Auto
BIOS determines the best mode automatically.
Call VGA at S3 Resuming
Selecting
Enabled
allows BIOS to call VGA BIOS to initialize the VGA card
when system wakes up (resumes) from S3 sleep state. The system resume
time is shortened when you disable the function, but system will need an AGP
driver to initialize the VGA card. Therefore, if the AGP driver of the card
does not support the initialization feature, the display may work abnormally
or not function after resuming from S3.
USB Wakeup From S3
This item allows the activity of the USB device to wake up the system from
S3 (Suspend to RAM) sleep state. Settings:
Enabled
,
Disabled
.
Power Management/APM
Setting to
Enabled
will activate an Advanced Power Management (APM)
device to enhance Max Saving mode and stop CPU internal clock. Settings:
Disabled
,
Enabled
.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep/suspend state. Available options are:
Single LED
The power LED turns off to indicate the sleep/suspend
state.
Dual LED
The power LED changes its color to indicate the sleep/
suspend state.
Suspend Time Out (Minute)
After the selected period of system inactivity, all devices except the CPU shut
off. Settings:
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60.
Display Activity
These items specify if the BIOS will monitor the activity of the specified
hardware peripheral or component. If set to
Monitor
, any activity detected on
the specified hardware peripheral or component will wake up the system or
prevent the system from entering the power saving modes. Settings:
Monitor
,
Ignore.
