Hardware Setup
2-23
To Attach the Optional USB 2.0 Ports:
1. Take out the USB 2.0 bracket
2. Locate the blue USB pinheader (USB3) on the motherboard.
3. Connect the USB cable from USB 2.0 bracket to the USB3 pinheader.
4. Place the USB 2.0 bracket into the appropriate slot of the system case.
Note:
The USB 2.0 controller is backwards compatible
with USB 1.1 spec. To use the USB 2.0 ports, you still
need to install USB 2.0 driver, which is supplied by
Microsoft for Windows
®
2000 and XP. If you have any
problems regarding USB 2.0 driver, please visit Microsoft
website for more information.
Connected to USB3 (the
USB pinheader in blue color)
USB 2.0 Bracket
This USB 2.0 port will not function when a
Bluetooth module is connected to the onboard
Bluetooth pinheader JBT1 (see page 2-19). If
no Bluetooth function is applied, remove the
sticker to utilize this port.
