4-15
BIOS Setup
The Security Menu
This section lets you set security passwords to control access to the system
at boot time and/or when entering the BIOS setup program. It also allows you to set
virus protection at hard disk boot sector.
Super visor Password Is/User Password Is
It shows the preset supervisor/user password. (read only)
SetSuperv isor/User Password
Enabling
“
Supervisor Password
”
requires a password for entering Setup. The pass-
words are not case sensitive. Pressing <Enter> at either Set Supervisor Password or
Set User Password displays the following message:
Type the password and press <Enter>. Repeat.
Password on boot
Choosing Enabled requires a password on boot. It requires prior setting of the Super-
visor password. If supervisor password is set and this option is disabled, BIOS
assumes user is booting. Options: [Enabled], [Disabled].
Diskette access
Setting privilege of password to boot from or access the f loppy disk. Options:
[Supervisor], [User].
Set Supervisor Password
Enter New Password:
Confirm New Password:
[
]
[
]