MSI Hetis 865GV User Manual Download

Page: 64 / 100

4-9

BIOS Setup

ARMD-HDD

The system will boot from ARMD device, such as MO
or ZIP drive, that functions as hard disk drive.

CD/DVD

The system will boot from the CD-ROM/DVD-ROM.

Legacy SCSI

The system will boot from the SCSI.

Legacy NETWORK

The system will boot from the Network drive.

BBS-0

The system will boot from the first BBS (BIOS Boot
Specification) compliant device.

BBS-1

The system will boot from the second BBS (BIOS Boot
Specification) compliant device.

BBS-2

The system will boot from the third BBS (BIOS Boot
Specification) compliant device.

BBS-3

The system will boot from the fourth BBS (BIOS Boot
Specification) compliant device.

BBS-4

The system will boot from the 5th BBS (BIOS Boot
Specification) compliant device.

BBS-5

The system will boot from the 6th BBS (BIOS Boot
Specification) compliant device.

BBS-6

The system will boot from the 7th BBS (BIOS Boot
Specification) compliant device.

BBS-7

The system will boot from the 8th BBS (BIOS Boot
Specification) compliant device.

BBS-8

The system will boot from the 9th BBS (BIOS Boot
Specification) compliant device.

BBS-9

The system will boot from the 10 BBS (BIOS Boot
Specification) compliant device.

USB FDD

The system will boot from USB-interfaced floppy drive.

USB CD-ROM

The system will boot from the USB-interfaced CD-
ROM.

USB HDD

The system will boot from the USB-interfaced HDD.

USB RMD-FDD

The system will boot from any USB-interfaced ARMD

device, such as LS-120 or ZIP drive, that functions as a
floppy drive.

USB RMD-HDD

The system will boot from USB-interfaced ARMD

device, such as MO or ZIP drive, that functions as hard
disk drive.

Disabled

Disable this sequence

Summary of Contents for Hetis 865GV





































































































Search results

Summary of Contents for Hetis 865GV

Reviews:

Related manuals for Hetis 865GV

Brands by name

Popular brands

MSI Hetis 865GV, User Manual

Search results

Summary of Contents for Hetis 865GV

Reviews:

Related manuals for Hetis 865GV

Brands by name

Popular brands