Introducing Mainboard
2-9
1.
The DDR DIMM has only one notch on the center of module. The module
will only fit in the right orientation.
2.
Insert the DIMM memory module vertically into the DIMM slot. Then
push it in.
3.
The plastic clip at each side of the DIMM slot will automatically close.
Volt
notch
Installing DDR Modules
NOTE
: Refer to p. 3-7 for more information.
DDR Population Rules
Install at least one DIMM module on the slots. Each DIMM slot supports
up to a maximum size of 1GB. Users can install either single- or double-sided
modules to meet their own needs. Please note that
each DIMM can work
respectively for single-channel DDR, but there are some rules while using
dual-channel DDR
(Please refer to the suggested DDR population table on p.
2-8)
.
Users may install memory modules of different type and density on different-
channelDDR DIMMs. However, the
same type and density memory modules
are necessary while using dual-channel DDR, or instability may happen.
