2-10
MS-9136 SSI Server Board
The mainboard provides connectors to connect to FDD, IDE HDD,
case, LAN, USB Ports, CPU/system power supply fans, ... and etc.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Connectors
Fan Power Connectors: FAN1/2/3/5/6
The FAN1, FAN2, FAN3, FAN5, and FAN6 support system cooling fan with
+12V. It supports three-pin head connector. When connecting the wire to the
connectors, always note that the red wire is the positive and should be connected to
the +12V; the black wire is Ground and should be connected to GND. If the mainboard
has a System Hardware Monitor chipset onboard, you must use a specially designed
fan with speed sensor to take advantage of the CPU fan control.
FAN5
Sensor
+12V
GND
MSI Reminds You...
Always consult the vendors for proper CPU cooling fans.
FAN1/3
Sensor
+12V
GND
FAN2/6
Sensor
+12V
GND
FDD1
Chassis Intrusion Switch Connector: JCI1
This connector is connected to a 2-pin chassis switch. If the chassis is open,
the switch will be short. The system will record this status and show a warning
message on the screen. To clear the warning, you must enter the BIOS utility and
clear the record.
JCI1
1
GND
CINTRU
2
