background image

3-1

BIOS Setup

Chapter 3. BIOS Setup

BIOS Setup

This chapter provides information on the BIOS Setup program

and allows you to configure  the system for optimum use. You may
need to run the Setup program when:

”

 An error message appears on the screen during the system boot-

ing up, and requests you to run SETUP.

”

 You want to change the default settings for customized features.

MSI Reminds You...

1. The items under each BIOS category described in this chapter
are under continuous update for better system performance.
Therefore, the description may be slightly different from the lat-
est BIOS and should be held for reference only.

2. Upon boot-up, the 1st line appearing after the memory count is
the BIOS version. It is usually in the format:

P9152MS V1.0 150304 where:

1st digit refers to BIOS maker as A = AMI, W = AWARD,
and P = PHOENIX.
2nd - 5th digit refers to the model number.
6th - 7th digit refers to the customer as MS = all standard
customers.
V1.0 refers to the BIOS version.
150304 refers to the date this BIOS was released.

Summary of Contents for E7320 Master Series





























































































Reviews: