MSI CRYSTAL A410 - Crystal - A410, User Manual

Page: 53 / 58

3-17
BIOS Setup
choosing [S1&S3[ option. But if there are any devices
do not support S3 mode, system will enter S1 mode
instead of S3 mode.
PWRON After PWR-fail
This item specifies whether your system will reboot after a power failure or interrupt
occurs. Available settings are:
[Off] Leaves the computer in the power off state.
[On] Leaves the computer in the power on state.
[Former-sts] Restores the system to the status before power failure
or interrupt occurred.
Wake Up Event Setup
Press <Enter> and the following sub-menu appears.
Wake-Up by PCI card
W hen setting to [Enabled], the feature allows your system to be awakened by
PCI card.
USB KB Wake-Up from S3
This setting allows you to enter
“
Any Key
”
(max. 8 numbers) to wake up the
system from S3 state. S
Resume By Alarm
The field is used to enable or disable the feature of booting up the system on a
scheduled time/date.
Date
The field specifies the date for Resume By RTC Alarm . Settings: [0]~[31].
PDF created with pdfFactory Pro trial version www.pdffactory.com