3-5
G
e
ttin
g
Sta
rted
Releasing the Battery Pack
It is always recommended to have another battery in reserve for enough power supply. Please
contact your local dealer to buy a battery pack that is compliant to your notebook. To remove the
battery pack, following the steps below:
1. Make sure the notebook is turned
off, and the AC power is
disconnected.
2. Press the lock/unlock button in
the unlocked position.
3. Locate the battery release button
on the bottom side.
4. Push and hold the release button
to the battery releasing direction
as shown on the bottom side.
5. Carefully slide the battery pack
out of the compartment and then
pull the battery pack out.
2
5
4
3
Summary of Contents for CR410
