19 |
P a g e
Machine Solutions Inc. 2951 W. Shamrell Blvd. Flagstaff, Arizona 86005 USA
Tel: 928.556.3109
•
Fax: 928.556.3084
•
www.machinesolutions.com
Figure 9
:
System Pneumatic Schematic 185-A and 210-A
Servicing
Note: Disconnect system main power and air before servicing any part of the product.
Heating Element
1. Remove the top cover of the remote heater enclosure.
2. Disconnect the two electrical quick-disconnects.
3. Disconnect the air line from the rear of the heater boot by carefully pulling it rearward.
4. Loosen the rear set screw on the left side of the heater mount block.
5. Push the heater airline to the side and then carefully slide the heating element rearward until
it is fully clear of the mount block.
6. Install the replacement heater with the tab oriented down, inserting it fully into the mount
block.
7. Re-install the air fitting into the heater boot.
8. Re-connect the electrical connections.
9. Install the top panel.
Summary of Contents for BEAHM 160-A
Page 1: ......
