MSI AE2040, User Manual

Page: 8 / 68

Preface
▍
viii
ce conformity
Hereby, Micro Star International co., ltD declares that this device
is in compliance with the essential safety requirements and other
relevant provisions set out in the european Directive.
fcc-b Radio frequency Interference Statement
this equipment has been tested and found to comply with the
limits for a class b digital device, pursuant to Part 15 of the
fcc Rules. these limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. this equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the measures listed below:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
consult the dealer or an experienced radio/television technician for
help.
notice 1
the changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
notice 2
Shielded interface cables and Ac power cord, if any, must be used in order to
comply with the emission limits.
VoIR lA notIce D’InStAllAtIon AVAnt De RAccoRDeR AU ReSeAU.
this device complies with Part 15 of the fcc Rules. operation is subject to the
following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that
may cause undesired operation.
￭
￭
￭
￭
1.
2.