MSI 970A-G46 Series Manual Download Page 20

Page: 20 / 78

1-10

Gettng Started

Gold arrow

Introducton to AM3/ AM3+ CPU

The surface of CPU. Remember to apply some thermal paste on t for better heat

dsperson.

CPU (Central Processng Unt)

Important

Overheatng

Overheatng can serously damage the CPU and manboard. Always make sure the

coolng fans work properly to protect the CPU from overheatng. Be sure to apply an

even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to

enhance heat dsspaton.
Replacng the CPU

When replacng the CPU, always turn off the system’s power supply and unplug the

power supply’s power cord to ensure the safety of the CPU.
Overclockng

Ths manboard s desgned to support overclockng. Before attemptng to overclock,

please make sure that all other system components can tolerate overclockng. Any

attempt to operate beyond product specficatons s not recommend. MSI does not

guarantee the damages or rsks caused by nadequate operaton beyond product

specficatons.

Summary of Contents for 970A-G46 Series















































































Search results

Summary of Contents for 970A-G46 Series

Reviews:

Related manuals for 970A-G46 Series

Brands by name

Popular brands

MSI 970A-G46 Series, Manual

Search results

Summary of Contents for 970A-G46 Series

Reviews:

Related manuals for 970A-G46 Series

Brands by name

Popular brands