MSI 945GCM7 series Manual Download Page 79

Page: 79 / 93

B-9

Intel ICH7R SATA RAID

Installing Software

Install Driver in Windows XP / 2000

†

New Windows XP / 2000 Installation

The following details the installation of the drivers while installing W indows XP /
2000.

1. Start the installation:

Boot from the CD-ROM. Press F6 when the message "Press F6 if you need
to install third party SCSI or RAID driver" appears.

2. W hen the W indows XP Setup window is generated, press S to specify an

Additional Device(s).

3. Insert the driver diskette

Intel IAA RAID XP Driver For ICH7R (NH82801GR)

into drive A: and press <Enter>.

4. Choose the driver

Intel(R) 82801GR SATA RAID Controller

from the drop-

down list that appears on W indows XP Setup screen, and press the <Enter>
key.

5. Press <Enter> to continue with installation or if you need to specify any

additional devices to be installed, do so at this time. Once all devices are
specified, press <Enter> to continue with installation.

6. From the W indows XP/2000 Setup screen, press the <Enter> key. Setup will

now load all device files and then continue the Windows XP/2000 installation.

†

Existing Windows XP/2000 Driver Installation

1. Insert the MSI CD into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Under the Driver tab, click on

Intel IAA RAID Edition

4. The drivers will be automatically installed.

†

Confirming Windows XP/2000 Driver Installation

1. From W indows XP/2000, open the

Control Panel

from

My Computer

fol-

lowed by the System icon.

2. Choose the

Hardware

tab, then click the

Device Manager

tab.

3. Click the "

" in front of the

SCSI and RAID Controllers

hardware type. The

driver

Intel(R) NH82801GR SATAII RAID Controller

should appear.

Important

Please follow the instruction below to make an

“

Intel IAA RAID XP Driver

For ICH7R (NH82801GR)

”

for yourself.

1. Insert the MSI CD into the CD-ROM drive.
2. Click the

“

Browse CD

”

on the Setup screen.

3. Copy all the contents in the

: \

\IDE\Intel\ICH7R\Floppy

to a formatted

floppy disk.

4. The driver disk for ICH7R RAID controller is done.

7507v1.0-B_ICH7R RAID.p65

2007/12/7,

下午

03:27

Summary of Contents for 945GCM7 series






























































































Search results

Summary of Contents for 945GCM7 series

Reviews:

Related manuals for 945GCM7 series

Brands by name

Popular brands

MSI 945GCM7 series, Manual

Search results

Summary of Contents for 945GCM7 series

Reviews:

Related manuals for 945GCM7 series

Brands by name

Popular brands