manualshive.com logo in svg

MSI 919-98E2-001, Manual

Share
Download
MSI 919-98E2-001 Manual Download Page 49

3-15

BIOS Setup  

MS-98E2

 

▶

ME Firmware Version, ME Firmware Mode, ME Firmware SKU, System 

Integrity Value, ME Firmware Status 1, ME Firmware Status 2, NFC Sup-

port

These settings show the firmware information of the Intel ME (Management 

Engine).

 

▶

ME State

This setting specifies the Intel Management Engine state.

 

▶

Manageability Features State(SKU1:C236)

This setting specifies the Intel ME Manageability Features.

 

▶

AMT BIOS Features(SKU1:C236)

This setting specifies the AMT BIOS Features.

 

▶

AMT Configuration(SKU1:C236)

Intel Active Management Technology (AMT) is hardware-based technology for 

remotely managing and securing PCs out-of-band.

 

▶

Comms Hub Support

This setting enables/disables Comms Hub Support.

 

▶

JHI Support

This setting enables/disables JHI Support.

 

▶

Core BIOS Done Message

This setting enables/disables the Core BIOS Done Message.

 

▶

Firmware Update Configuration

 

▶

ME FW Image Re-Flash

This setting enables/disables the ME FW image reflash.

Summary of Contents for 919-98E2-001





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands