BIOS Setup
3-15
(Suspend to RAM) sleep state. Settings:
Enabled
and
Disabled
.
Mouse Wakeup From S3
This item allows the activity of the mouse to wake up the system from S3
(Suspend to RAM) sleep state. Settings:
Enabled
and
Disabled
.
Keyboard Wakeup From S3
This item allows the activity of the keyboard to wake up the system from S3
(Suspend to RAM) sleep state. Settings:
Enabled
and
Disabled
.
Specific Key for Wakeup
This setting allows users to set a specific key for the
Keyboard Wakeup
From S3
function.
Power Management/APM
Setting to
Enabled
will activate an Advanced Power Management (APM)
device to enhance Max Saving mode and stop CPU internal clock. Settings are
Disabled
and
Enabled
.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single LED
The power LED blinks to indicate the sleep state without
changing its color.
Dual LED
The power LED changes its color to indicate the sleep
state.
Suspend Time Out (Minute)
After the selected period of system inactivity, all devices except the CPU shut
off. Settings are
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, and 60
.
FDC/LPT/COM Ports, Primary/Secondary Master/Slave IDE
These items specify if the BIOS will monitor the activity of the specified hard-
ware peripheral or component. If set to
Monitor
, any activity detected on the
specified hardware peripheral or component will wake up the system or pre-
vent the system from entering the power saving modes. Settings:
Monitor
and
Ignore
.