Chapter 3
3-22
USB 2.0 Supports
Set to
Enabled
if your need to use any USB 2.0 device in the operating system
that does not support or have any USB 2.0 driver installed, such as DOS and
SCO Unix. Setting options:
Disabled, Enabled
.
USB Legacy Support
Set to
Enabled
if your need to use any USB device in the operating system that
does not support or have any USB driver installed. Setting options:
Disabled,
Enabled
.
Onboard PCI IDE
This setting controls the on-chip IDE controller. Setting options:
Disabled
,
Primary
,
Secondary, Both
.
Set Super I/O
Press <Enter> to enter the sub-menu and the following screen appears:
OnBoard FDC
This is used to enable or disable the onboard Floppy controller.
Option
Description
Auto
BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enabled
Enables the onboard Floppy controller.
Disabled
Disables the onboard Floppy controller.
