the ‘Day’ automatically changes
when you set the date
Time
HH : MM : SS
Set the system time
IDE Primary Master
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub
menu of detailed options
IDE Primary Slave
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub
menu of detailed options
IDE Secondary Master
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub
menu of detailed options
IDE Secondary Master
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub
menu of detailed options
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy disk
drive installed in your system
Video
EGA/VGA
CGA 40
CGA 80
MONO
Select the default video device
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which
you want the BIOS to stop the
POST process and notify you
Base Memory
N/A
Displays the amount of
conventional memory detected
during boot up
Extended Memory
N/A
Displays the amount of
extended memory detected
during boot up
Total Memory
N/A
Displays the total memory
available in the system
IDE Adapters:
The IDE adapters control the hard disk drive. Use a separate sub menu to
configure each hard disk drive.
Figure3-2-1 shows the IDE primary master sub menu.
CMOS Setup Utility – Copyright © 1984-1998 Award Software
IDE Primary Master
17