A-10
MS-96C8 Server Board
Installing Driver
Install Driver in Windows Server 2008/2003
†
New Windows Server 2008/2003 Installation
The following details the installation of the drivers while installing operating system.
1. W hen you start installing W indows Server 2008/2003, you may encounter a
message stating,
“
Setup could not determine the type of one or more mass
storage devices installed in your system
”
. If this is the case, then you are
already in the right place and are ready to supply the driver. For W indows
2003, if this is not the case, then press F6 when prompted at the beginning of
W indows setup.
2. Press the
“
S
”
key to select
“
Specify Additional Device
”
.
3. You should be prompted to insert a floppy disk containing the Intel
®
RAID
driver into the A: drive.
Important
Please follow the instruction below to make an
“
Intel
®
RAID Driver
”
for
yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Click the
“
Browse CD
”
on the Setup screen.
3. Copy all the contents in
\\SATA2_RAID\f6flpy3288
(32 bits)
or
\\SATA2_RAID\f6flpy6488
(64 bits) to a formatted floppy diskette.
4. The driver diskette for
Intel
®
ICH10R RAID Controller
is done.
4. During the Operating system installation, after selecting the location to install,
click on
“
Load Driver
”
button to install a third party SCSI or RAID driver.
5. When prompted, insert the floppy disk or media (CD/DVD or USB) you created
in step 3 and press Enter.
6. You should be shown a list of available SCSI Adapters.
7. Select the appropriate Intel RAID controller and press ENTER.
8. The next screen should confirm that you have selected the Intel
®
RAID
controller. Press ENTER again to continue.
9. You have successfully installed the Intel SATA RAID driver, and W indows
setup should continue.
10. Leave the disk in the floppy drive until the system reboots itself. W indows
setup will need to copy the files from the floppy again after the RAID volume
is formatted, and W indows setup starts copying files.\
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Summary of Contents for 5500 Master Series
