MSI 5500 Master Series User Manual Download Page 2

Page: 2 / 113

Copyright Notice

T he material in this doc ument is the intellec tual property of

M ICRO-STAR

INTERNATIONAL

. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-

marks of NVIDIA Corporation in the United States and/or other countries.

AMD, Athlon

™

, Athlon

™

XP, Thoroughbred

™

, and Duron

™

are registered trade-

marks of AMD Corporation.

Intel

and Pentium

are registered trademarks of Intel Corporation.

PS/2 and OS

/2 are registered trademarks of International Business Machines

Corporation.

W indows

98/2000/NT/XP/Vista are registered trademarks of Microsoft Corporation.

Netware

is a registered trademark of Novell, Inc.

Award

is a registered trademark of Phoenix Technologies Ltd.

AMI

is a registered trademark of American Megatrends Inc.

Revision History

Revision

Revision History

Date

V1.0

First release

April 2009

Technical Support

If a problem arises with your system and no solution can be obtained from the user

’

manual, please contact your place of purchase or local distributor. Alternatively,

please try the following help resources for further guidance.

Visit the MSI website for FAQ, technical guide, BIOS updates, driver up-

dates and other information:

http://www.msi.com/index.php?func=service

Contact our technical staff at:

http://ocss.msi.com

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Summary of Contents for 5500 Master Series


















































































































Search results

Summary of Contents for 5500 Master Series

Reviews:

Related manuals for 5500 Master Series

Brands by name

Popular brands

MSI 5500 Master Series, User Manual

Search results

Summary of Contents for 5500 Master Series

Reviews:

Related manuals for 5500 Master Series

Brands by name

Popular brands