A-9
Intel SATA RAID
Installing Software
Install Driver in Windows XP / 2000
†
New Windows XP / 2000 Installation
The following details the installation of the drivers while installing W indows XP /
2000.
1. Start the installation:
Boot from the CD-ROM. Press F6 when the message "Press F6 if you need
to install third party SCSI or RAID driver" appears.
2. W hen the W indows XP Setup window is generated, press S to specify an
Additional Device(s).
3. Insert the driver diskette
Intel IAA RAID XP Driver (NH82801GR)
into drive
A: and press <Enter>.
4. Choose the driver
Intel(R) 82801GR SATA RAID Controller
from the drop-
down list that appears on W indows XP Setup screen, and press the <Enter>
key.
5. Press <Enter> to continue with installation or if you need to specify any
additional devices to be installed, do so at this time. Once all devices are
specified, press <Enter> to continue with installation.
6. From the W indows XP/2000 Setup screen, press the <Enter> key. Setup will
now load all device files and then continue the Windows XP/2000 installation.
†
Existing Windows XP/2000 Driver Installation
1. Insert the MSI CD into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Under the Driver tab, click on
Intel IAA RAID Edition
.
4. The drivers will be automatically installed.
†
Confirming Windows XP/2000 Driver Installation
1. From W indows XP/2000, open the
Control Panel
from
My Computer
fol-
lowed by the System icon.
2. Choose the
Hardware
tab, then click the
Device M anager
tab.
3. Click the "
+
" in front of the
SCSI and RAID Controllers
hardware type. The
driver
Intel(R) NH82801GR SATAII RAID Controller
should appear.
9188v1.0-Appendix A(Intel SATA RAID).p65
2007/4/10,
下午
02:41
9
Summary of Contents for 5000P Master2 Series
