3-11
BIOS Setup
Base I/O Address
These items specify the base I/O addresses of the onboard Serial Port A/B.
Interrupt
These field allows you to select IRQ Resources for Serial Port A/B.
Parallel ATA
A
This setting allows you to enable or disable the onchip Parallel-ATA controller.
Serial ATA
A
This setting allows you to enable or disable the onchip Serial-ATA controller.
Native Mode Operation
Certain OS does not support Native Mode. In this mode, system BIOS will search
all available IRQs to use for HDD.
* New OS that supports switch to Native Mode (WinXP, Windows .NET
Server) can set SATA and PATA to Native Mode.
* Maximum 6 ATA devices to connect (4 for P-ATA & 2 for S-ATA).
SATA Controller M ode Option
This setting specifies SATA controller mode. Please note that Pre-W in2K OS
’
s
do not work in Enhanced mode.
[Compatible]
SATA and PATA drives are auto-detected and placed in Legacy
mode.
[Enhanced]
SATA and PATA drives are auto-detected and placed (non-
AHCI) in Native IDE mode.
Summary of Contents for 5000P Master
Page 1: ...i 5000P Master MS 9175 V1 X Server Board G52 91751X1...
Page 5: ...v WEEE Waste Electrical and Electronic Equipment Statement...
Page 6: ...vi...
Page 7: ...vii...
