MSG MS013 COM, User Manual

Page: 12 / 28

12
• "PROTOCOL" : voltage regulator protocol type ("BSS", "LIN").
• "VOLTAGE" : voltage of "B+" terminal, V.
• "ERROR" : potential errors in voltage regulator operation. The are 3 types of potential errors:
– "EL" : electric;
– "МЕС" : mechanic;
– "ТН" : thermal.
• "DFM" : alternator load control indicator, %.
• "Volt.Reg" : indicator of set voltage, Volt. The value is set with the buttons "⇧" and "⇩".
5.2 When testing voltage regulators
with "RLO", "SIG", "P-D", "C" terminals
• TERMINAL : voltage regulator testing mode
terminal. "RLO", "SIG", "P-D", "C" protocols are
displayed. The terminal designation depends on
the selected option in the menu.
• VOLTAGE : Voltage of "B+" terminal, V.
• DFM : alternator load control indicator, %.
• Vol. Reg : indicator of set voltage, Volt. The
value is set with the buttons "⇧" and "⇩".
5.3 Display data output in "PWM" mode (PWM generator)
• PWM, % : set of the duty cycle in percent,
varying from 0 to 100.
• FREQUENCY, Hz : set of frequency, Hertz. Value
varies from 0 to 100. The required value is
set by pressing the pole with the number on
the touch screen. The value is set with the
buttons "⇧" and "⇩".
User Manual - Adapter MSG MS013 COM