background image

f) The dates and results of the checks have been carried out; 

g) If the equipment were decommissioned, the measures taken to recover and dispose of the fluorinated 

greenhouse gases. 

 

2. The operator shall keep the records for at least five years, those who carry out 

the activities for operators shall keep copies of the records for at least five years. 
 

SAFETY NOTICES: 

 

A. The appliance must be positioned so that the plug is accessible   

B. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard.   

C. This appliance can be used by children aged from 8 years and above and persons with reduced physical, 

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or 

instruction concerning use of the appliance in a safe way and understand the hazards involved. Children 

shall not play with the appliance. Cleaning and user maintenance shall not be made by children without 

supervision.   

D. This appliance shall be installed in accordance with national wiring regulations.   

E. Disconnect the power supply before cleaning and maintenance.   

F. This appliance contains the fluorinated greenhouse gases that hermeticall sealed, the installation, 

maintainence, repairment and disposal must be handled by the professional and qualified persons, 

according to related chapters or appendix in this operation manual.   

G. The water flow direction of this appliance is marked by sticker on its body and in this manual (see “Hose 

connection” at chapter 3.3). 

Summary of Contents for FO045HS


















Reviews: