MSG Equipment MSG MS013 COM, User Manual, Page: 11 / 12

11
6.3 PWM Signal Generator Mode
• Select the required option in the adapter menu with buttons .
• Enter the required testing mode with button .
• Connect GC and ‘-’ wires of the adapter outputs to a controlled device.
• Set duty cycle by pressing the corresponding frame on the touch screen. The lighting of the
buttons will change, use buttons to set the required numbers.
• Set frequency by pressing the corresponding frame on the touch screen. The lighting of the
buttons will change, use buttons to set the required numbers.
• To exit the testing mode, press button .
Disconnect the wires.
User Manual - Tester MSG MS013 COM
7. TEST CERTIFICATE
Tester MSG MS013 СОМ for adjustment of voltage regulators meets technical requirements of
Directive 2014/30/EU - Electromagnetic Compatibility (EMC) EN Directive 2014/35/EU - Low voltage
(LVD) Directive 2006/42/EC - Machinery (MD) and is qualified for exploitation.