MS031 allows you to test the solenoid assembly with the starter directly on the car or a
dismantled solenoid separately from the starter.
The device is connected to the solenoid according to the marking described in the item 3.2. The
test is carried out in the following manner:
- Connect the device to the 220V network;
- Disconnect the power terminal of the starter motor from the output of the solenoid;
- Connect all the necessary terminals of the starter solenoid;
- Turning the encoder set the voltage level required for the tested starter solenoid in the range
from 5V to 15V;
6. OPERATIONAL SEQUENCE
This diagram will help you connect the device correctly:
Pic. 7 Starter connecting and checking steps
User Manual - MS031
English
12
