English
Test bench MS008
12
Figure 7. Cable for the connection of starter terminal 50
5. APPROPRIATE USE
1. Use the bench for the specified purpose only.
2. Turning off the bench should be done through the interface of the service program by pressing
the "Turn off the bench" button.
3. Press EMERGENCY STOP button only for the crisis shut down of bench drive, tightening, and to
cut off the power clip supply.
4. In case of failures in the operation of the bench, stop further operation and contact the
manufacturer or sales representative.
The manufacturer is not responsible for any damage or injury to human health resulting from
non-compliance with the requirements of this user manual.
5.1. Safety Guidelines
1. The bench has to be operated by the qualified persons who got the access to operate the
definite bench types and who were instructed on the safe operating procedures and methods.
2. The bench has to be turned off if the supply is terminated, during the cleaning and tidying up,
as well as in the emergency situations.
3. The work area must always be clean, with good light illumination, and spacious.
4. To ensure electrical and fire safety PROHIBITED:
- connect the bench to the electrical network having faulty protection against current overloads
or not having such protection;
— use a socket without a grounding contact to connect the bench;
— use extension cords to connect the bench to the electrical network. If the socket is far from the
bench installation site, it is necessary to modify the electrical network and install the socket;
- operation of the bench in defective condition.
- Independently to repair and make changes to the design of the bench, because it can lead to
serious damage to the bench and deprive the right to warranty repair.
5. It’s forbidden to leave the units with running drive on the bench unattended.
