9
Workout Pricipal
1. Personal goals can include shaping, strengthening, improving present fitness level,
rehabilitation of previous injuries, cardiovascular exercising, etc... By using the Pedal
Exerciser correctly and on a regular basis, you can achieve your goals.
2. Available time is a major element in determining what we do in our daily lives. If
you can only exercise for 15 minutes, develop a 15 minute program with the Pedal
Exerciser.
3. Exercising and working out on the Pedal Exerciser should be an enjoyable part of your
daily life.
4. Focus on the exercises. No matter what your present level of fitness, you can complete
each exercise in a short range of time and sense the increased level of strength and
endurance.
5. Always start exercising slowly, to warm up muscles.
6. The design of the Pedal Exerciser allows you to exercise your muscles with natural and
efficient movements.
The Overload Principal
In order for you to strengthen your body, you must develop a series of exercise workouts
each day. When you work out on a regular basis, your body (specifically your muscles),
adjust to the new level of workout. This is called “increasing local metabolic efficiency”.
As a result, your muscles work better and you get stronger. If you keep working at the
same level of metabolic efficiency, you can’t improve muscle efficiency. So from time to
time, you need to increase the frequency and/or duration of the exercise. Thus, in order
to improve your fitness level, you must progressively increase your work load to reach
your personal goal.
How to use your Deluxe II Pedal Exerciser.
The Deluxe II Pedal Exerciser can only be used after the power cord is plugged into the
electrical outlet. Do NOT use the Deluxe II Pedal Exerciser without the power plugged in
as this will damage the equipment. When using the Deluxe II Pedal Exerciser, the proper
way to exercise is to set the desired rotational speed of the pedal (RPM level) by pressing
the UP or DOWN button on the controller, and then following that speed to get the best
results. Pedaling at excessive speed or applying excessive force will activate the overload
protection circuitry to stop the motor, allowing the user to retract feet/hands. The motor
will turn off for 2-3 seconds and then turn on again automatically. If the motor overload
situation persists (motor turns off and then turns on) for 10 times, the motor will stop
working completely, which may cause motor damage. The STOP sign will flash on the
controller and the controller will alarm for 8 seconds. Press the DOWN button until the
RPM level reaches 0. Then you may press the UP button to start exercising again.
Workout
