MSB Technology Universal Media Transport plus User Manual Download Page 41

Page: 41 / 44

Adding Background Music

You can add background music to the photo slideshow. To do so, you will need to prepare some digital music files. The music files can

be stored on the same disk as the photos, or on a different USB drive. Start music playback first by selecting “Music” from the home

menu. Once the music is playing, press the HOME button to get back to the home menu, and start the photo slideshow by selecting

“Photo” in the usual manner.

System Automation

The UMT can be controlled completely in an automated system with RS-232 control. Have your installer contact MSB for complete

RS-232 codes. Much of the UMT can also be controlled with various APPs available from OPPO.

Trouble Shooting Guide

I have no audio when using the ProI2S interface:

Make sure you have connected the ProI2S output indicated with a Green ring to a

ProI2S input on the DAC IV Plus/Analog DAC. The DAC IV Plus has a green ring around the ProI2S input. The Analog DAC ProI2S

input module is also green. If you are using with an older DAC IV (Non-Plus) you will need the ProInput card installed and the input

configured correctly. The easiest way to test if it’s configured correctly is to cycle through the inputs, you should see “ProI2S.” If you

see “ProNetwork” the card is configured wrong. Please consult your manual for changing it over.

I am playing a SACD with a non-MSB product and I all here is noise/distortion:

Your DAC is not DSD via DoP compatible. You will

need to change the output of the UMT Plus to output DSD via PCM by pressing <DIMMER><DIMMER><DIMMER><5>

I am trying to use the UMT Plus in multichannel mode with non-MSB DACs, but SACD is not working correctly:

In multichannel

mode, the UMT Plus can only output the SACD as DoP. If you want it to work for compatibility only, you can change the on screen

settings not to output SACD but this will be of low quality and is not recommended.

I have no audio or the wrong channels coming out of the Toslink and RCA outputs:

The unit is configured for multichannel mode.

Please change the unit back to stereo by pressing <DIMMER><DIMMER><DIMMER><4> for default stereo DSD DoP playback.

I am playing a SACD and I do not see DSD on my DAC display:

This can be three problems.

1. Most likely you have HDMI audio on. When HDMI audio is on, the output settings are restricted by your TV. Please make sure to

go into the settings and set HDMI Audio to off. If you still do not see DSD on your DAC, please power off the UMT unplug the HDMI

cable, and try playing the SACD without a HDMI cable plugged in.
2. The UMT might be set up to play the CD layer. Please look in the display and check to see if it’s showing SACD Playback. If not,

please check your settings and set SACD Playback to Stereo.
3. The unit has been changed to output SACD via PCM instead of DoP. If this is the case, press <DIMMER><DIMMER><DIMMER><4>

for default stereo DSD DoP playback.

I have changed the unit to Multichannel playback, but I have no center channel:

The default MSB settings have the center channel

turned off. Go into the settings to speaker setup and set the center channel to LARGE.

I am playing a movie and I hear no voices:

The center channel in the speaker setup is turned on. Go into the settings to speaker setup

and set the center channel to OFF.

I can play some DSD files but other ones play at the wrong speed:

The UMT Plus can only play DSD64x files. The UMT cannot play

128x DSD files.

The unit doesn’t power on:

Make sure the 12v power is plugged into the primary power connector and not just the 2nd power connector.