MSB Technology Universal Media Transport plus, User Manual, Page: 12 / 44

12
Remote Buttons
1. POWER: Toggle power STANDBY and ON
3. PURE AUDIO: Turn off/on video
4. NUMBER Buttons: Enter numeric values
5. CLEAR: Clear numeric input
6. TOP MENU: Show BD top menu or DVD title menu
7. ARROW and ENTER Buttons: Navigate menu selection
8. OPTION: Brings up the context-related menue
9. COLOR Buttons: Function varies by content
10. PLAY: Start playback
11. STOP: Stop playback
12. REV: Fast reverse play
13. PREV: Skip to previous
14. AUDIO: Change audio language or channel
15. SUBTITLE: Change subtitle language
16. SETUP: Enter the player Setup Menu
17. A-B REPLAY: Repeat play the selected section
18. RESOLUTION: Switch output resolution
19. OPEN: Open/close the disc tray
20. INPUT: Select the input source
22. MUTE: Mute audio (Mutes UMT, not DAC)
23. VOLUME +/-: Increase/Decrease volume on DAC IV
(Volume bar on OSD should be ignored)
24. HOME: Go to Home Menu to select media source
25. PAGE UP/DOWN: Show the previous/next page
26. INFO: Show/hide the on-screen Display
27. GOTO: Play from a specified location
28. POP-UP MENU: Show BD pop-up menu or DVD menu
29. RETURN: Return to the previous menu or mode
30. PAUSE: Pause playback
31. FWD: Fast forward play
32. NEXT: Skip to the next
33. 3D: Enable 2D->3D conversion or bring up the 3D menu
34. ZOOM: Zoom in/out and adjust aspect ratio
35. DIMMER: Dim the front panel display
36. REPEAT: Repeat play
37. LIGHT: Activate the back light for the remote control
SPECIAL MODE:
<DIMMER> <DIMMER> <DIMMER> <number pad> is used
for advanced audio settings and a common zone free upgrade.
Changing the Remote Code
The remote control supports one of three remote codes. The default
is “Code 1”. If you experience conflicts with another remote, you can
select a different remote code.
To select a new remote code, open the battery compartment cover of
the remote control, and then flip the switch to one of the positions
marked as “1”, “2”, or “3”. Close the battery compartment cover. Make
sure that the UMT player is turned on and the disc tray is ejected. Aim
the remote control at the player. Press and hold the ENTER button for
5 seconds. The player will start using the new remote code.
The advanced audio commands only work with remote code 1.