MSB Technology Reference Headphone Amplifier User Manual Download Page 8

Technical Support

If you are experiencing any issues with your MSB product, please contact 

your nearest dealer or try our support page at www.msbtechnology.

com/support

. Please be sure you have the most current edition of your 

products firmware installed. If your issue persists please feel free to 

contact MSB directly. Emails are usually responded to in 24 - 48 hours.

Email:

 [email protected]

MSB Return Procedure (RMA)

If  a  customer,  dealer,  or  distributor  has  a  problem  with  an  MSB 

product, they should email tech support before sending anything 

back to the factory. MSB will do their best to respond within 24 hours. 

Should  it  be  clear  that  a  product  must  be  returned,  tech  support 

should be informed and all the following relevant information should 

be provided:

1

Product in question

2

Serial number

3

Exact configuration when symptom is observed along with a list 

with the input used, source material, system connections, and 

amplifier

4

Customer name

5

Customer shipping address

6

Customer phone number and email

7

Special return shipping instructions

MSB will issue an RMA number and create an invoice with all details 

outlined except the final price as the product has not yet been seen. 

This invoice will be emailed so all the above information can be checked 

and verified by the customer.

The product should be returned with the RMA number present on the 

box. Work can then begin immediately and the product can be sent 

back quickly.

Any repair that is difficult and cannot be completed in two weeks will be 

identified and the customer will be informed when it is to be expected. 

Otherwise the majority of repairs should be shipped back within two 

weeks if all the required information is present on the invoice.

Link to page:

 

http://www.msbtechnology.com/faq/msb-product-return-procedure/

Summary of Contents for Reference Headphone Amplifier










Reviews: