MSB Technology Reference Headphone Amplifier, User Manual, Page: 4 / 9

Getting Started
When plugging in power, the amplifier detects the input voltage and
automatically switches between 120 or 240 volt operation. It is also
available in a non-switching 100 volt permanent configuration.
Amplifier Interface
There are two control features just under the front of the powerbase.
Front control White
- Power on.
Red
- Power off / bypass mode.
Amber
- Linked mode, 12 volt trigger controlled.
Flashing Amber
- Over-voltage protection.
‘Display’ wheel This is a rolling wheel to control the brightness of
the power indication light
Function switch Normal
- The front button on the unit switches between on
and off (enables pass through).
No IR
- The front button on the unit switches between on
and off (enables pass through). Remote commands
disabled.
Linked
- The front button on the unit switches between
on and pass through while keeping the unit on.
Remote commands disabled.
Connecting to your Amplifier
Connect your headphones to the front or rear headphone jacks.
Connect your MSB DAC XLR Analog Outputs into the amplifier Inputs
Connect pass through XLR outputs to your main system amplifiers.
**GENERAL WARNINGS**
Only for use with an MSB DAC.
DO NOT open your headphone Amp.
NO SERVICEABLE PARTS.