MSA SUPREMATouch MCP 20, Operating Manual

Page: 55 / 241

55
Entering System Parameters
GB
SUPREMATouch
Assignment
Fig. 36 “Assignment” window
Use this window to view assignments of the sensors, gases, ranges, dimensions and linearisation
tables.
In the assignment window, all used entries are sorted in a descending sequence of their cell
number. When the parameters for sensor, gas, measuring range and dimension match the values
of the corresponding measuring point for the first time, the linearisation table to be used is
assigned for the measuring point.
Field Field Type Function
ID (ID of this
linearizion
table)
Selection A linearizion table can be selected by its ID.
Status (Status
of this data
cell)
Display
Displays the status of the cell used for data saving. This status
is always
protected so the data cannot be changed and the
following input fields are display-only fields.
Node
Number input
(Locked) Nodes are defined for each 5% increment along the X axis. The
linearity curve is shown in the diagram on the right.
Field Field Type Function
Entry (Number
of this cell)
Selection
An assignment entry can be selected by its cell through this
field.
Status (Status
of this data
cell)
Display
Displays the status of the cell used for data saving. This status
is always
protected and so data cannot be changed.
Head ID and
assignment
Display Displays the remote sensor used in the selected assignment.
Gas ID and
assignment
Display Displays the gas name used in the selected assignment.
Range ID and
assignment
Display Displays measuring range used in the selected assignment.
Dimension ID
and assign-
ment
Display Displays the dimension used in the selected assignment.
Lin. tab. ID Display Displays the linearisation curve of the selected assignment.