Operating manual
v.0.3
Page 6
1.3.2
To
connect
input
power
supply,
use
terminals
“L” and
“N”, loads – “–V” and “+V”, see Figure 2.
Figure 2 – Connection diagram of the Product
1.4
M
EASUREMENT INSTRUMENTS
,
TOOLS AND APPLIANCES
Table 3 below describes consumables required for the TS.
Table 3 – Consumables required for the TS
Name and identifier of consumables
Amount of consumables
Note
Cleaning cloth
0.10 kg
1
To clean the Product surfac-
es – use clean cloth
2
To remove severe contami-
nation – use cloth soaked in
alcohol
Rectified hydrolytic technical ethyl alcohol
0.05 l
To soak cloth when removing
contamination from a screen
Varnish
0.05 kg
To cover surfaces of the Prod-
uct in case of paint coating
damage
Abrasive cloth
0.06 х 0.06 m
To polish surfaces of the Prod-
uct in case of paint coating
damage
1.5
M
ARKING AND SEALING
The Product has a nameplate indicating name, serial number, date of manufac-
turing, weight, protection degree, input and output voltage, power.
The sealing of the Product is not provided.