61
Safekeeping and Storage
G1 Industrial SCBA
US
18 Safekeeping and Storage
18.1 SCBA
WARNING!
DO NOT drop the cylinder or bump the valve knob. An unsecured cylinder can become an airborne
projectile under its own pressure if the valve is opened even slightly.
Misuse can result in serious injury or death.
• Do not store the SCBA or spare cylinders within or near an area where the SCBA can or might be
exposed to any substances that will or might attack any part of the SCBA, causing the SCBA to not
perform as designed and approved.
• Prior to storing the SCBA in a jump seat, ensure there is no interference between the SCBA and
the seat. Ensure the SCBA and cylinder can be removed easily without damaging the components.
• Do not store the SCBA with an empty or partially filled cylinder. Always install a fully-charged
cylinder so that the SCBA is ready for use.
• Complete Inspection and Cleaning and Disinfecting Procedures outlined in this manual. Ensure
the entire SCBA is clean and dry.
• Ensure the facepiece head harness adjustment straps are fully extended. Place the complete
SCBA in the storage case or suitable storage location so it can be easily reached for emergency
use.
18.2 Facepiece
For the safekeeping of the facepiece, a facepiece pouch or container should be used.
WARNING!
In order to avoid damage to or the deformation of the facepieces keep no additional loose objects in
the facepiece container. Failure to follow this warning can result in serious injury or death.
MSA rubber products are protected by an anti-aging agent that can become visible as a light coating.
This coating is harmless and can be removed during cleaning.
To ensure a long life of rubber components, follow ISO 2230 by storing them in a cool, dry place
protected from ultraviolet radiation.
