Operation
EZ Gateway Start-up Guide
13
4.3
Connecting to the EZ Gateway
4.3.1 Using the FieldServer Toolbox to Discover and Connect to the EZ Gateway
•
Install the Toolbox application from the USB drive or download it from the MSA Safety website.
•
Use the FS Toolbox application to find the EZ Gateway and launch the FS-GUI.
NOTE: If the connect button is greyed out, the EZ Gateway
’s IP Address must be set to be on the
same network as the PC. (Section
4.3.2 Using a Web Browser to Connect to the EZ Gateway
•
Open a web browser and connect to the EZ Gateway
’s default IP Address. The default IP Address
of the FieldServer is
192.168.2.101
, Subnet Mask is
255.255.255.0
.
•
If the PC and the EZ Gateway are on different IP networks, assign a static IP Address to the PC
on the 192.168.2.X network.
